







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Thousand Oaks Owner’s Guide
Wellborn driveway and paver parts in Thousand Oaks typically run $7,000 – $18,000 installed for a full paver driveway, with repair and replacement work on existing sections priced from the hundreds into the low thousands depending on the base failure. We stock Wellborn-compatible paving components and can usually have a crew out to assess your driveway within a few days, not weeks.
Most Thousand Oaks homeowners discover a paving problem the hard way: a paver sinks after two winters of rain, an edge row starts drifting into the lawn, or a section of the driveway develops a low spot that pools water against the garage slab. The good news is that Wellborn pavers are a known quantity. We see the same failure patterns across Thousand Oaks, from Newbury Park to the Conejo Valley foothills, and we know what to look for before a small base issue becomes a full driveway teardown.
Which Wellborn Models This Applies To

Wellborn’s driveway and paver line covers a few distinct product families, and the part you need depends on which one you have. The interlocking concrete pavers come in standard 60mm and 80mm thicknesses for residential driveways, with the 80mm version spec’d for heavier vehicles. Wellborn also produces permeable pavers designed for Thousand Oaks hillside drainage, and those have a different joint width and base requirement than the standard units.
The compatibility gotcha we run into constantly: Wellborn’s color batches are not perfectly stable across production runs. A paver you bought in 2018 in “Warm Sand” will not match a 2024 run of the same color name. If you’re patching a section rather than replacing the full driveway, we take photos of your existing pavers, measure the dimensions and chamfer, and match from current stock before we quote. For OEM versus aftermarket: Wellborn pavers are manufactured to tight dimensional tolerances, and a cheap off-brand paver will telegraph the difference within two years, especially at the edges. We recommend staying with Wellborn or a spec-equivalent from Belgard or Techo-Bloc if you’re extending a Wellborn driveway.
Styles & brands we work with







Signs Your Wellborn Driveway & Pavers Is Failing
- Settling or low spots that hold water. This means the compacted base under the pavers has shifted or washed out. In Thousand Oaks, expansive clay soil and winter rains push water under the sand bed, and the base gives way unevenly. Patching a paver without fixing the base is a waste of your money.
- Edge rows separating or tipping outward. The edge restraint system, usually a plastic or concrete paver edging, has failed. Once the edge moves, the interlocking tension across the entire field weakens, and adjoining pavers start walking apart.
- Paver cracks or surface spalling. Cracks usually come from heavy point loads, like an RV or a too-sharp turn from a full-size truck. Spalling, the flaking of the paver face, is often a manufacturing or freeze-thaw issue. Wellborn’s spec pavers resist this, but older runs in constant shade can hold moisture and degrade.
- Weeds or ants pushing up between joints. The polymeric sand in the joints has failed. This is the most common call we get in Thousand Oaks. It looks cosmetic but it’s structural: once the joints lose their sand, the pavers lose lateral support and start moving.
- White mineral staining on the surface. Efflorescence happens when water moves through the paver and carries salts to the surface. It’s usually a drainage problem, not the paver itself. You can clean it, but if the drainage issue stays, the staining comes back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Thousand Oaks, a full Wellborn paver driveway replacement runs $7,000 – $18,000 installed. Partial repairs are far less: pulling and resetting a settled section with new base material typically falls in the $1,200 – $3,500 range depending on square footage and access. Edge restraint repair usually runs $400 – $1,000 per side.
Every quote we give is a written line-item price before any work starts. You’ll see the paver cost, base material, haul-away, and labor as separate lines. No change orders creep in later. For driveway work, we pull required Thousand Oaks permits and schedule inspections where the city requires them. Workmanship is covered under our 365-Day Done Right Promise: if something we installed or repaired fails within a year of completion, we fix it at no cost to you.
DIY or Call Us?
You can safely handle joint sand replenishment on a small patio area, and you can clean efflorescence with a paver-safe cleaner. That is the honest limit for most homeowners. Anything involving base failure, edge restraints, or a driveway that carries vehicle weight needs a compacted base, a plate compactor, and proper grading. Get that wrong and the pavers will fail again within a season or two, and you’ll pay twice.
If you’re seeing settling, open joints, or a failing edge restraint, call us at (805) 309-3386 for a free estimate. We’ll tell you what’s actually wrong before we tell you what it costs.
FAQs

A properly installed Wellborn paver driveway in Thousand Oaks should last 25 to 30 years before the pavers themselves need replacement, though the underlying base and edge restraints typically need servicing at the 10 to 15 year mark. The paver units hold up to our climate well, but California’s wet winters and expansive soils shorten the life of the base system. Call (805) 309-3386 and we’ll assess what your driveway actually needs.
A cracked paver cannot be structurally repaired; it has to be replaced. What can be repaired is the base underneath it, which is usually the real problem. We can pull a single cracked unit, rebuild the base under that spot, and reset a color-matched Wellborn paver for far less than a full driveway replacement. Call (805) 309-3386 for an exact quote.
Most partial repairs in Thousand Oaks take one to two days depending on the size of the failed area and how much base material needs to be removed and re-compacted. Full driveway replacements typically run three to five days including base preparation, install, and final compaction. We give you a written timeline with your written price before work begins.
We keep common Wellborn paver sizes and colors in stock at our Thousand Oaks yard, and we can order specialty colors or permeable units with a short lead time. We’ll match your existing pavers as closely as the current production batch allows before you commit. Call (805) 309-3386 to confirm what we have for your specific Wellborn line.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Thousand Oaks, CA at Mason Remodeling Co Thousand Oaks, serving Thousand Oaks and nearby areas.


