







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Thousand Oaks Owner’s Guide
A Unilock kitchen remodel in Thousand Oaks typically runs between $14,000 and $45,000 installed, depending on cabinet layout, countertop square footage, and whether we’re moving plumbing or electrical. We stock Unilock-compatible pavers, wall units, and edge restraints for kitchen-adjacent hardscaping jobs, and we can match most Unilock paver lines same-week. If you’re reading this, you’ve probably got a Unilock patio, walkway, or retaining wall that’s failing somewhere near or under your kitchen footprint, or you’re planning a kitchen expansion that needs the existing Unilock hardscape tied back in correctly.
Most Thousand Oaks homeowners discover the problem the same way: a paver sinks at the kitchen door threshold, a wall cap shifts and lets water behind it, or the sand joints start washing out every time the sprinklers run. Sometimes it’s not a failed paver at all. It’s a remodel that’s about to happen and the contractor bid doesn’t include bringing the Unilock surface back to grade. Both are fixable. We do this work within kitchen remodel scopes all the time.
Which Unilock Models This Applies To

Most of the Unilock product lines we see in Thousand Oaks fall into three families: the Estate collection (larger-format pavers like Courtstone and Promenade), the U-Cara Multi-Face wall system, and the Pavers by Town Hall or Bristol Valley style lines that were installed heavily in Conejo Valley tract builds from the 1990s through the 2010s. Each family has its own joint width, base spec, and replacement availability. Courtstone and Promenade are still in production, so matching is straightforward. Some older U-Cara fascia panels have been discontinued, which means we substitute a current panel profile or reface the entire wall section if the color match matters.
If you still have the original Unilock invoice, the product code is on it. If not, measure the paver. Courtstone runs 7-3/4″ x 9-1/2″ and Promenade runs 6″ x 9″. U-Cara fascia panels are 8″ tall. Get those dimensions and call us. We can identify the line from a photo and a measurement without a site visit, most days. For OEM versus aftermarket: Unilock still manufactures most of their current lines, and we order OEM whenever color consistency matters. For discontinued lines, we source quality aftermarket equivalents from Belgard or Techo-Bloc that match within one shade. We’ll show you samples before any work starts, so you’re not surprised on install day.
Styles & brands we work with







Signs Your Unilock Kitchen Remodeling Is Failing
- Pavers sinking or dipping near the kitchen door. This is almost always base failure underneath, not the paver itself. Thousand Oaks clay soil expands and contracts with moisture, and older installs without adequate gravel fill will settle. We pull the section, re-compact, and relay.
- Sand joints washing out repeatedly. If you sweep fresh polymeric sand into the joints every spring and it’s gone by fall, the edge restraint has failed. Water gets under the pavers and carries the sand out through the low edge. We replace the restraint and re-sand the whole field.
- U-Cara wall leaning out at the top. This is a drainage problem, not a product problem. Water saturates the soil behind the wall, freezes rarely but saturates constantly, and the hydrostatic pressure pushes the fascia forward over a few seasons. We rebuild with proper drain pipe and gravel backing.
- Crumbled or chipped paver edges along a walking path. Thousand Oaks has hard water, and years of irrigation overspray leave mineral deposits that weaken the concrete surface. Once the paver face spalls, it keeps going. We cut out the bad units and swap in matched replacements.
- Gap between the house slab and the first paver course. Soil movement under the hardscape creates a trip hazard right at the kitchen threshold. If the gap is over half an inch, the base has compacted unevenly. We re-work the edge course against a new concrete haunch so it stays put.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Thousand Oaks, our Unilock kitchen-adjacent hardscape work falls within these installed ranges. A partial paver repair or re-level job runs $3,500 to $11,000 depending on square footage and how much base reconstruction is needed. A full paver patio replacement tied into a kitchen remodel lands at $7,000 to $18,000. Adding or rebuilding a Unilock retaining wall as part of a kitchen expansion or outdoor build ranges from $3,500 to $11,000 for the hardscape portion. For the kitchen itself, a full remodel runs $14,000 to $45,000, with small kitchen scopes at $9,000 to $20,000.
Every quote is a written line-item price before work starts. You’ll see the paver unit cost, base material, labor, haul-away, and any permit fees as separate lines. If we find hidden damage after we open the section, we stop work and put the change order in writing before we proceed. No surprises on the final invoice. The work comes with our 365-Day Done Right Promise: if it’s not right within a year of completion, we come back and make it right at no charge to you.
DIY or Call Us?
You can safely check a few things yourself: take measurements, note the paver color, snap clear photos, and look for the product code if you have the original paperwork. That saves us time when we price the job. What you shouldn’t do is start prying up pavers that are set against your foundation or near a gas line. Gas lines to outdoor kitchens and fire pits run shallow in Thousand Oaks yards, sometimes under the paver field itself. A pry bar through a gas sleeve is a bad afternoon. The same goes for walls over three feet tall; they hold a lot of soil tension and come apart quickly if the cap course is removed wrong.
If you want to pull the old sand and re-sweep joints, that’s a reasonable homeowner job. If the pavers have moved, the wall has leaned, or water is pooling against the foundation, call (805) 309-3386. We’ll look at it, price it in writing, and you decide with real numbers in front of you.
FAQs

Properly installed Unilock pavers last 25 to 40 years in Southern California weather. The base underneath usually fails before the paver itself does. UV exposure slightly fades color over the first few years, then stabilizes. If your pavers are failing at the 15-year mark, it’s almost always a base or drainage issue, not a product defect.
Yes, most of the time. Individual pavers can be swapped, sand joints re-filled, and edge restraints re-set without replacing the entire field. If the base has failed in multiple spots or the pavers have shifted enough to create gaps, a partial rebuild is usually cheaper than chasing individual repairs. We’ll tell you which is which after we see it. Call (805) 309-3386 for an honest assessment.
A single-section repair or re-level takes one to two days. Rebuilding a full patio or a retaining wall section takes three to five days, depending on access and weather. If we’re tying hardscape into a kitchen remodel, we sequence it with the rest of the project so you’re not living with an open trench any longer than necessary.
We stock the most common Thousand Oaks favorites on our trucks and in our yard: Courtstone, Promenade, U-Cara fascia panels in the standard colorways, and matching edge restraints. Discontinued colors and unusual formats get ordered from Unilock’s regional distribution, which usually takes three to five business days. We’ll confirm availability before we schedule the work.
If you’ve got a Unilock surface that’s failing or you’re planning a kitchen remodel that touches existing hardscape, call (805) 309-3386. Isaac Pruett and the Mason Remodeling Co Thousand Oaks crew will come out, measure it, give you a written price, and tell you exactly who’s doing the work and when. Tell me what you need done. We’ll tell you what it costs and how long it takes, then we’ll do exactly that.
Written by Isaac Pruett, Owner, Mason Remodeling Co – Thousand Oaks, CA at Mason Remodeling Co Thousand Oaks, serving Thousand Oaks and nearby areas.


