Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Thousand Oaks Homeowners Choose KraftMaid Construction
Our Thousand Oaks Kraftmaid service means cabinet installation, refacing, and repair work performed by crews who know these cabinet lines from the inside out. We’re Mason Remodeling Co Thousand Oaks, an independent KraftMaid service provider, and we handle everything from full kitchen cabinet installation to the small fixes that drive homeowners crazy, like soft-close drawers that slam and hinges that keep pulling loose. Our work is backed by a written price before we start and the 365-Day Done Right Promise after we finish. If you own KraftMaid cabinets anywhere in Thousand Oaks, call (805) 309-3386 and we’ll tell you straight whether repair or refacing makes more sense.
Thousand Oaks has thousands of homes built from the 1960s through the 1980s, many with kitchens that have seen one or two cabinet generations already. A lot of those kitchens hold KraftMaid cabinetry installed during remodels in the 1990s and 2000s. We know which lines hold up in our low-humidity Southern California climate and which finish details start failing after years of daily use. We’re not a manufacturer-authorized service center. We’re independent, which means we recommend what’s actually best for your kitchen, not what a warranty department wants us to say.
Why Trust Mason Remodeling Co Thousand Oaks for Your KraftMaid Construction?
Isaac Pruett founded this company with a simple rule: tell the homeowner what’s wrong, what it costs to fix, and how long it takes. That applies to KraftMaid work just like everything else we do. Isaac learned the trade at Los Angeles Trade-Technical College and has spent years on job sites across the region, including kitchens near Lang Ranch where homeowners trust us to get KraftMaid cabinet work right without drama. His crew has seen every KraftMaid failure mode this city can produce.
Every technician who arrives at your door follows the Threshold Standard. That means we send you their name and photo before the visit. They arrive in a clean, marked uniform, show a photo ID badge at the door, and are background-checked and identity-verified before they ever step onto your property. You’ll never wonder who’s walking through your front door. You get the written price before any work begins, and the written guarantee covers our KraftMaid installation and refacing work for 365 days from the completion date. If something isn’t right within that year, we come back and make it right at no cost to you.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Thousand Oaks
- Soft-close drawer slides losing their dampening on Vantage and Venicia lines. These lines use a nylon dampener inside the slide mechanism that wears out after 3 to 5 years of daily use. The drawer still opens and closes, but it slams shut with a sharp crack. Thousand Oaks kitchens see this constantly because homeowners use lower cabinet drawers dozens of times a day. We replace slide units with KraftMaid-spec parts so the soft-close action returns.
- Hinges on high-use base cabinets pulling loose on Monteray and Millbrook doors. The particleboard side panels on older Monteray and Millbrook base cabinets can’t hold the hinge screws forever, especially under a heavy pot drawer or a cabinet used for dishes. Once the screw strips, the door sags and rubs against the frame. We reinforce the hinge plate area with proper backing or use threaded inserts to restore the mount, then realign the door.
- Thermofoil door edges peeling near dishwashers and ovens on Vantage cabinets. This is the failure we see most in Thousand Oaks kitchens. Thermofoil is a heat-fused vinyl laminate, and repeated exposure to heat and steam from dishwashers and wall ovens breaks the adhesive bond along the bottom edge of sink base and oven-adjacent door fronts. The foil lifts, then curls. Regluing rarely holds. We usually recommend refacing those door fronts.
- Adjustable shelf clips fracturing on older Monteray wall cabinets. Early Monteray wall cabinets used plastic shelf clips that get brittle after 15 to 20 years. The clips snap, the shelf drops, and dishes go with it. We replace them with metal clips or newer KraftMaid hardware that fits the existing pin holes without modifying your cabinet box.
- Face frame separation on Millbrook cabinets in galley kitchens. Thin galley kitchens, common in Thousand Oaks tract homes built in the 1970s, expose cabinet frames to more humidity swings than larger kitchens. Over time, the joints where face frame meets cabinet box can pull apart. This isn’t a cabinet that needs replacing; it needs reinforcing and regluing. We do that in place, saving the owner thousands over a full tear-out.
KraftMaid Parts & Our Repair-vs-Replace Approach
When a cabinet box or door is intact, we source genuine KraftMaid hardware. The factory specifications for hinge plates, slide lengths, and mounting hole positions are too exact to gamble with generic parts. A soft-close slide that’s 3 millimeters off means a drawer that doesn’t sit flush or a soft-close that never engages. We order KraftMaid-spec hardware and keep a stock of common slide lengths and hinge plates in our Thousand Oaks shop so we can turn around repairs quickly without waiting on long backorders.
For doors with peeling thermofoil or cracked frames, we almost always recommend refacing over repair. Here’s the honest math: stripping a thermofoil door, prepping the substrate, and re-laminating it takes more labor hours than buying a new door front. Once we factor in finish consistency, the new door costs less. We’ll give you both numbers and let you decide. Call (805) 309-3386 if you’re weighing a repair against a refacing job and want a straight answer.
See the difference
Before
After
Before
After
Before
AfterOur KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect every cabinet box, door, hinge, and slide in your kitchen or bath. We identify the KraftMaid line, the exact failure, and whether it’s isolated or systemic. A single worn slide is a $45 fix. Twelve worn slides across a Vantage kitchen tells us the whole run is near end of life and refacing may be smarter.
- 2
Written price. Before any work starts, you get a written line-item price covering parts and labor. No verbal estimates that grow on the final bill. This is our standard on every project, never an exception.
- 3
Repair or installation. We handle everything from single-drawer slide replacement to full kitchen cabinet installation and refacing. Each step uses the correct KraftMaid hardware and follows the manufacturer’s installation geometry for hinge placement and drawer alignment.
- 4
Testing and cleanup. Every drawer opens and closes through its full travel. Every door is adjusted for even reveal gaps. We test soft-close action, clean the work area, and walk you through what we did.
- 5
365-Day Done Right Promise. If anything we installed or repaired fails within 365 days of completion, we return and make it right at no charge. The guarantee has clear terms, stated in writing, with no fine-print loopholes.
KraftMaid Products We Service & Install in Thousand Oaks
Our crews work on the KraftMaid lines most common in Thousand Oaks kitchens and baths: Vantage, Venicia, Monteray, and Millbrook. We handle full cabinet installation on new builds and remodels, cabinet refacing for kitchens with solid boxes but tired faces, roll-out tray installation, hinge and slide replacement, door front replacement, and shelf clip repairs. We stock common soft-close slides, hinge plates, and shelf hardware locally so many repairs happen on the first visit. If you have a discontinued Monteray color and need matching doors, we have suppliers who can produce close-match door fronts.
We Also Service These Brands
KraftMaid is a major part of our cabinet work in Thousand Oaks, but as a General Contractor, we’re not a single-brand shop. We install and service Cambria, Silestone, Kohler, and Toto products too. If your kitchen has KraftMaid cabinets and a Silestone countertop, one call covers both.
FAQs – KraftMaid Construction Service in Thousand Oaks
Is Mason Remodeling Co Thousand Oaks authorized by KraftMaid?
No, we are an independent KraftMaid service provider, not a manufacturer-authorized dealer. That independence matters because we recommend the repair or refacing approach that’s best for your kitchen and your budget, not what a warranty program dictates. Our work is covered by our own written guarantee for 365 days from completion.
Do you use genuine KraftMaid or OEM parts?
Yes, whenever a cabinet box or door is intact, we source genuine KraftMaid hardware because the factory specs for hinge plate mounting and slide lengths are too precise to replace with generics. For doors with peeling thermofoil or cracked frames, we recommend refacing with new door fronts instead of patching.
How long does KraftMaid service take in Thousand Oaks?
A single soft-close slide replacement or hinge reinforcement typically takes 30 to 60 minutes on site. A full kitchen of slide replacements runs half a day. Cabinet refacing for a standard Thousand Oaks kitchen usually takes 2 to 4 working days depending on how many door fronts need replacing. Call (805) 309-3386 and we’ll give you a realistic timeline for your job.
What KraftMaid models or series do you cover?
We service Vantage, Venicia, Monteray, and Millbrook lines, including discontinued color and door style variants. If you’re not sure which line you have, describe the cabinet or send us a photo and we’ll identify it before the visit.
Will service void my KraftMaid warranty?
Using the correct KraftMaid-spec parts and proper installation methods won’t void your cabinet warranty. We follow the manufacturer’s installation geometry and hardware specs on every job. Keep in mind that many Thousand Oaks kitchens have KraftMaid cabinets well past their original warranty period anyway, which makes independent service the practical choice.
How much does KraftMaid construction cost in Thousand Oaks?
It depends on the scope. Full KraftMaid cabinet installation for a kitchen runs $4,000 to $13,000. Cabinet refacing with new doors, drawer fronts, and hardware runs $5,000 to $12,000. Replacing soft-close slides runs $45 to $95 per drawer. Call (805) 309-3386 for an exact line-item quote, free.
| KraftMaid Service | Price Range |
|---|---|
| KraftMaid Cabinet Installation (full kitchen) | $4,000 – $13,000 |
| KraftMaid Cabinet Refacing (doors + drawer fronts + hardware) | $5,000 – $12,000 |
| Soft-close slide replacement (per drawer) | $45 – $95 |
Written by Isaac Pruett, Owner at Mason Remodeling Co Thousand Oaks, serving Thousand Oaks since 2004.
