







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in West Hills, CA | Mason Remodeling Co Thousand Oaks
We’re an independent Jerith service in Calabasas and throughout West Hills, and the short answer is this: if your Jerith fence, gate, or railing is pulling out of plumb, corroding at the post bases, or sagging at the hinges, we can repair it correctly the first time. What sets our work apart in West Hills is that we know the ground your Jerith system sits on. The hillside lots south of Victory Boulevard are built on ancient alluvial fans, and the drainage failures that come with them are what actually destroy most Jerith installations here, not the aluminum itself. Call us at (805) 309-3386 and we’ll tell you exactly what’s wrong and what it costs to fix.
Why West Hills Residents Choose Us for Jerith Service
Jerith aluminum fencing is a specific product with specific failure patterns. We know the Defender Series, Estate Series, Liberty Series, and Titan Series by name, and we know which parts fail first on each one in this climate. When a West Hills homeowner calls us about a leaning Jerith fence, we don’t start from zero. We start by checking what’s underneath it. Isaac Pruett grew up in Los Angeles and spent years at Los Angeles Trade-Technical College before running jobs across the region, and that background means he asks the boring questions first: where does the water go, how deep are the posts, and what did the original installer do about the slope. Most Jerith problems in West Hills aren’t aluminum problems. They’re footing problems. We fix the footing. See Jerith sales & service for the full scope of what we handle.
Styles & brands we work with







Common Jerith Construction Problems We Solve in West Hills
- Post-bracket corrosion at the concrete anchors. This one shows up constantly on hillside lots where sprinkler overspray hits the fence line and winter rains channel runoff straight into the post bases. The aluminum is fine. The steel bracket embedded in the concrete is not. We replace with stainless or heavy-duty aftermarket brackets when the corrosion resistance exceeds what the original hardware provided.
- Sagging gates on bolted aluminum frames. West Hills summers routinely push past 100°F, and that thermal expansion and contraction works hinge bolts loose over a few seasons. A gate that drags on the latch side usually isn’t bent. It’s loose at the hinges. We re-align, upgrade the hinge kit if needed, and torque everything back to spec.
- Fence-panel bowing from shifting retaining walls. Many West Hills homes date to the 1960s and 1970s, and the original retaining walls were rarely engineered for today’s stormwater loads. When a wall shifts, it pulls embedded Jerith posts out of plumb, and the panels bow even though the aluminum itself is straight. We reset the posts in properly engineered footings before re-hanging the panels.
- Powder-coat chalking and peeling on south-facing runs. After 15 to 20 years of direct West Hills sun, powder coat on Jerith panels starts to chalk and peel, especially on long southern exposures with no shade. We can match the existing color on partial replacements and give you an honest read on whether the whole run needs recoating or just a few panels.
- Gate hinges bending repeatedly. If your Jerith gate hinges keep bending every couple of years, the hinge is rarely the root cause. It’s almost always a post that’s moving, a gate that’s oversized for the frame, or a footing that’s losing ground to slope runoff. We address the cause, not just the symptom.
Jerith Service in West Hills: What Local Conditions Mean for Your Equipment

West Hills south of Victory Boulevard sits on ancient alluvial fans where original 1970s drainage swales now overflow during winter storms. What that means for Jerith owners is specific and checkable. The same stormwater that undermines fence footings also saturates the substrate under shower pans and entry walkways, so a leaning fence and a cracked shower tile often trace back to the same failed drain line - which is why we also offer Bathroom Remodeling in West Hills. We’ve seen it on Platt Avenue, on cul-de-sacs off Valley Circle, and across the neighborhoods that step down toward the Santa Susana drainage patterns. The 1970s swales were sized for smaller storms. Today they overflow, and the water takes the path of least resistance. If your Jerith fence sits downhill from one of those swales, the post footings are getting wet repeatedly every winter, even in dry years, from irrigation overspray that follows the same slope. We don’t just reset the post. We redirect the water away from the footing so the repair lasts longer than the next rain.
Our crew reset a 140-foot Jerith Defender Series run on a cul-de-sac off Platt Avenue after winter rains washed out the original post footings. The aluminum panels had pulled out of plumb by a full 3 inches, but the rails were still sound. We re-poured 24-inch piers with helical tie-backs into the deeper clay and re-bolted the fence with stainless brackets. A year later that run is dead level, even after another wet season.
See the difference
Before
After
Before
After
Before
AfterJerith Models & Products We Service in West Hills
We service all four major Jerith residential lines: Defender Series, Estate Series, Liberty Series, and Titan Series. Each has its own frame geometry and hardware spec, and we keep the common replacement components on hand or available same-week for West Hills jobs. We use genuine Jerith post caps, hinges, and tension bars wherever structural dimensions matter, because those parts are sized to the rail profile and swapping in a generic creates slop. But we’ll spec high-quality aftermarket brackets and fasteners when they outperform the OEM hardware, particularly in corrosion-prone hillside locations. Our honest repair-vs-replace stance is simple: we replace post and rail systems when aluminum shows stress cracks, but we’ll keep intact panels from a 1960s-era install if they’re still straight and sound. No upsell, no unnecessary tear-out. For the full service picture in this area, see West Hills service area.
Jerith Service Pricing in West Hills

Here’s what Jerith repair and restoration work typically costs in the West Hills market:
| Service | Price Range |
|---|---|
| Fence post reset and bracket replacement (per post) | $250 – $700 |
| Jerith gate hinge upgrade kit | $200 – $600 |
| Tile roof repair (Jerith-compatible flashing) | $600 – $2500 |
What drives the cost is the footing work. A post that comes up with a simple bracket swap is cheap. A post that needs a new 24-inch pier with helical tie-backs into deeper clay costs more, because it’s real excavation and concrete work, not a hardware swap. We give you a written price before any work starts, and the estimate is free. Call (805) 309-3386 and we’ll come out, look at your fence line, and tell you what it actually needs.
Serving West Hills, CA - Our Local Coverage Area
We’re a West Hills General Contractor based in this area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in West Hills
No. Standard 18-inch post footings are not enough on most West Hills hillside lots, especially south of Victory Boulevard where the native soils expand and contract. We routinely see original footings from 1970s-era installs that are undersized for today’s stormwater flows. On slopes, we recommend 24-inch piers with helical tie-backs or at minimum re-poured footings with deeper embedment and proper drainage away from the post. Call (805) 309-3386 for an honest assessment of your specific lot.
Yes, in most cases. We work with powder coat shops that can match Jerith’s standard finishes closely, and we’ll show you a sample before committing. On a 15-to-20-year-old fence, the existing panels have faded under West Hills UV, so even a perfect factory match will look slightly different next to the old panels. We’ll tell you that upfront and help you decide whether to touch up the whole run or accept a subtle difference on the repaired sections.
What’s the typical lifespan of Jerith Defender Series in West Hills before we need to replace rails?
The aluminum rails themselves often last 30 years or more in this climate. What fails first are the steel post brackets and the f











