Backsplash, Tile & Flooring in Thousand Oaks, CA

Backsplash, Tile & Flooring in Thousand Oaks, CA

Backsplash, tile, and flooring work in Thousand Oaks typically runs $12 – $38 per square foot installed, and most kitchen or bath projects wrap up in 3 – 7 working days once materials are on site. We’re Mason Remodeling Co Thousand Oaks, and we’ve been setting tile, laying flooring, and cutting backsplash across Ventura County since 2004. Before you commit to anything, call (805) 309-3386 and we’ll put a written price in your hands, not a hand-wave estimate.

This work is one of the most visible pieces of any Kitchen Remodeling in Thousand Oaks project, and it’s also one of the most common standalone requests we get. Homeowners replace a dated backsplash, pull up worn flooring after years of kids and dogs, or finally address the cracked tile in the guest bath. The job looks simple on the surface. It’s not. A quarter-inch out of level at the starting row becomes a half-inch at the ceiling. Grout mixed thin crumbles in two years. That’s why we send an experienced tile setter, not a general laborer, and why every job gets a written scope before the first tile is scored.

Here’s what you should know up front: every Mason Remodeling technician is background-checked and identity-verified through the Threshold Standard. You get the name and photo of the person coming to your door before they arrive. They show a photo ID badge when they knock. And the price we put in writing before we start is the price you pay, full stop.

Key Takeaways:

• Real installed pricing for Thousand Oaks: $12 – $38/sq ft depending on material and prep
• Written price before any work starts, every time, no exceptions
• Technician’s name and photo sent to you before arrival via the Threshold Standard
• 365-Day Done Right Promise covers the finished installation
• Same-week scheduling available for most tile and backsplash jobs

When You Need Backsplash, Tile & Flooring

Here are the situations we walk into most often in Thousand Oaks, from Newbury Park down to the Conejo Grade:

• Your kitchen backsplash is original to a 1990s or early 2000s build. Those 4×4 ceramic tiles with cracked grout lines are telling you something. Replacing them with a full-height slab or a modern subway pattern changes the entire room.
• Floor tile is cracking or coming loose. In Thousand Oaks, the expand-and-contract cycle from hot dry summers to cool damp winters stresses floor assemblies. If your subfloor flexes, tile fails. We fix the substrate first, then set the tile.
• You bought a home and want the floors done before you move in. Empty rooms mean faster work and lower cost. We schedule around your closing date whenever possible.
• You’re already doing a kitchen remodel and need one crew that handles everything. Backsplash and flooring have to coordinate with cabinet layout, countertop overhang, and appliance placement. We sequence them correctly.
• Water damage has compromised tile or underlayment. Whether it’s a slow leak behind a backsplash or a dishwasher overflow that warped the floor, we assess the damage before quoting, so there are no surprises mid-job.
• You tried a DIY tile job and the results aren’t right. Lippage (tile edges that sit proud of each other), uneven grout lines, and crooked cuts are the most common telltales. We can often re-work what’s there or start over clean.

Our Backsplash, Tile & Flooring Process

We’ve refined this sequence over more than 20 years of Thousand Oaks projects. It works because each step has a clear owner and a clear deliverable.

1. Phone consultation and measurements. Call (805) 309-3386. You’ll get a live person, not a phone tree, 24 hours a day. We’ll ask about square footage, material preferences, and your timeline.
2. In-home assessment. We check the substrate, look for moisture, verify flatness, and measure everything. This is where we catch the complications other crews find halfway through.
3. Written price delivered before any work starts. Not a verbal ballpark. A line-item price for materials, labor, prep, and disposal. You approve it. We don’t start until you do.
4. Crew introduction and schedule confirmation. You receive the name and photo of your technician before the visit. They arrive in a clean uniform, show a photo ID badge at the door, and report to you before unloading anything.
5. Prep, installation, and daily cleanup. We protect adjacent flooring and counters, cut outside when possible, and leave the job site clean at the end of every day.
6. Walkthrough and written guarantee. We walk the finished work with you, explain what’s covered, and document everything in writing. If something’s not right within 365 days of completion, we come back and make it right at no cost to you.

Backsplash, Tile & Flooring Pricing in Thousand Oaks

The numbers below reflect what we’ve seen across Thousand Oaks in 2024 and 2025, from Westlake-area remodels to starter homes near Thousand Oaks Boulevard. They’re real ranges, not teaser prices.

Project Type	Typical Range (Installed)	What Drives Cost
Kitchen backsplash, ceramic or porcelain subway tile	$12 – $18 per sq ft	Tile quality, layout pattern, outlet relocation
Kitchen backsplash, glass or handmade tile	$22 – $34 per sq ft	Material cost, cut complexity, edge finishing
Porcelain or ceramic floor tile	$10 – $16 per sq ft	Subfloor prep, demo of existing floor, pattern
Natural stone floor tile (travertine, slate, marble)	$18 – $28 per sq ft	Stone grade, sealing, larger format requires flatter subfloor
Luxury vinyl plank flooring	$8 – $14 per sq ft	Underlayment, existing floor condition, plank width
Full kitchen floor + backsplash package	$2,800 – $7,500+	Total square footage, material tier, prep scope

What moves the number most in Thousand Oaks, honestly, is what’s under the tile. Homes built before 1980 often have subfloors that don’t meet today’s flatness standard for large-format tile. We may need to add cement board, self-leveling underlayment, or in some cases a decoupling membrane. A Kitchen Remodeling project that includes flooring will also be more efficient per square foot than a standalone tile job, because we’re already on site and sequenced.

You’ll notice we mention brands like Schluter for membrane systems and Mapei or Laticrete for mortar and grout. We also work with specification-grade surface partners such as Cambria, Silestone, and Caesarstone when the job calls for stone surfacing, and we can source Kohler and Moen fixtures when a backsplash upgrade runs into a sink or faucet replacement. The materials come from established manufacturers, not whatever is on clearance at the big box store.

Every quote includes a free in-home assessment and a written price. Call (805) 309-3386 and we’ll come out, measure, and put real numbers in front of you. If the number doesn’t work for your budget, you’ll at least know exactly what’s involved. No obligation, no follow-up pressure.

Materials We Work With and How We Handle Them

Tile is not one product. The install method, the sealing requirements, and the long-term behavior all change by material. Here’s how we approach what we see most often in Thousand Oaks kitchens, baths, and entryways.

Ceramic and Porcelain Tile

Ceramic is the budget-friendly workhorse, and it’s ideal for kitchen backsplashes where it won’t see foot traffic. Porcelain is denser, less porous, and more durable; we recommend it for floors and any surface with exposure to water or heavy use. Both cut cleanly with a wet saw, which we run outside or with proper dust management. The difference in outcome between a rushed install and a patient one is visible in the grout lines and corner cuts.

Glass Tile

Glass reflects light in a way ceramic can’t, and in a Thousand Oaks kitchen with morning sun, a glass backsplash can change the room’s entire feel. It also chips more easily during cutting, requires a special blade, and shows installer errors more readily. We charge for the additional care it takes, and we don’t rush it. If you’re weighing glass against ceramic, come look at samples before deciding; the price difference is real, and the visual difference is too.

Natural Stone

Travertine, slate, marble, and limestone add old-world texture, but they’re porous. In a kitchen, that means oils, acids, and grease can stain if the stone isn’t sealed properly and maintained. We seal natural stone at installation and tell you what to expect over time. Stone floors in entryways also take a beating from the fine grit that tracks in from Thousand Oaks driveways after the wind blows through the Conejo Valley. Choose a stone with a honed or tumbled finish for those areas; polished stone shows every scratch.

Luxury Vinyl Plank and Engineered Wood

Not every floor needs to be tile. Luxury vinyl plank handles Thousand Oaks’ dry-summer humidity swings without the expansion issues solid hardwood runs into, and it’s softer underfoot for households with young kids or older adults. Engineered wood gives you the real wood look with better dimensional stability. We’ll tell you plainly which product serves your room, your pets, and your maintenance tolerance. The brand partners we use for flooring include proven names, and we can source professional-grade options through the same supplier relationships we’ve had for years.

Why the Installer Matters More Than the Tile

A $6-per-square-foot ceramic tile installed by a careful setter will outlast a $28-per-square-foot marble set by a rushed crew. The visible part of the job, the tile face, matters, but the hidden part, the mortar coverage, the substrate prep, the movement joint placement, is what determines whether you’re calling us back in five years or twenty.

We’ve repaired work in Thousand Oaks where the original installer skimped on thinset coverage and the floor tile began cracking within six months. We’ve seen backsplashes where the tiles were set level by eye instead of with a laser, and the grout line drift was visible from the kitchen table. These failures are almost always invisible at the time of installation. They show up later. Our approach is built around the fact that we want to install it once and not hear from you again until you’re ready for the next project, or until you’re calling because you’re thrilled and want to add the master bath.

That’s what the 365-Day Done Right Promise is about. If the work is not right within 365 days of completion, Mason Remodeling makes it right at no cost to you. We put that in writing, along with what’s covered, what’s excluded, and for how long. No verbal promises, no dispute process, no conditions. It’s one of the reasons homeowners in Thousand Oaks call us when they’ve been burned before, or when they’re letting a stranger into their home for the first time and want every safeguard available.

Who Comes to Your Door

If you’ve ever hired a contractor and felt your stomach drop when the person at the door didn’t match what you expected, you understand why we built this differently. Every Mason Remodeling technician is put through the Threshold Standard: a background check, identity verification, uniform standards, and a photo ID badge shown at the door. Before the visit, you receive the technician’s name and photo, so you know exactly who is coming. When they arrive, they state their name and show their badge. If anything doesn’t match, you call the office and we resolve it before any work begins.

This matters especially if you’re often home alone, if you have young children, or if you’re caring for an older parent. Opening your door to a stranger is a real safety decision. We’ve designed our process to make it a decision you can make with full information, not a leap of faith. Isaac Pruett, who leads Mason Remodeling Co Thousand Oaks, set the standard this way on purpose: the contractor’s job is to prove trustworthiness, not to ask for it.

FAQs – Backsplash, Tile & Flooring

How much does a kitchen backsplash cost in Thousand Oaks?

A kitchen backsplash in Thousand Oaks typically costs $900 – $2,800 installed for a standard 25 – 35 square foot kitchen, depending on tile choice and whether outlets need to be moved. Glass and handmade tile land on the higher end; ceramic subway tile is the most budget-friendly at $12 – $18 per square foot installed. Call (805) 309-3386 for an exact quote, written and delivered before anything is scheduled.

Can you install tile and flooring the same week I call?

In most cases, yes. Backsplash and flooring projects with materials already selected can often start within 3 – 5 business days. If tile needs to be ordered or a subfloor needs major prep, the timeline may stretch to a week or two. We’ll tell you the real timeline during the free in-home assessment, not a best-case scenario.

Is it cheaper to repair tile or replace it?

For a single cracked tile or a few loose tiles, repair is cheaper, typically $180 – $400 for a small patch job. But if the failure came from a flexing subfloor or poor original installation, patching will just move the problem to the next tile. We’ll diagnose the underlying cause honestly before recommending repair or replacement, and we’ll put both options in writing if it’s a close call.

Do I need to buy my own tile and flooring materials?

No. We source materials through our specification-grade supplier relationships and pass them through at cost without a hidden markup. You’re welcome to purchase materials yourself if you prefer, but keep in mind that we can’t guarantee the outcome with materials we haven’t vetted. If you supply the tile, it arrives damaged, or it’s out of square, that’s your risk. Our recommendation is to pick your look and let us handle the procurement so the warranty stays clean.

What if I don’t like the finished result?

We don’t leave the job until you’ve walked it with us and confirmed it matches the written scope we agreed to before work started. If something doesn’t match the agreed spec, we fix it before final payment. And if any installation fails within 365 days of completion, Mason Remodeling returns and makes it right at no cost to you. It’s written into the guarantee on every single project.

Get a Written Price Before You Decide

Backsplash and flooring decisions feel permanent, and in many ways they are. The best way to reduce the risk is to know the real numbers before you commit. Call (805) 309-3386 and we’ll schedule an in-home assessment. You’ll get a written price, a straight answer about your subfloor and prep needs, and the name and photo of the technician who will do the work. No vague estimates, no surprise invoices, no strangers at the door. That’s how we’ve worked in Thousand Oaks since 2004, and it’s how we’ll work on your home.

Written by Isaac Pruett, Owner at Mason Remodeling Co Thousand Oaks, serving Thousand Oaks.